Camaro 1969 Z/28 Logo

SKU: GM69Z2803 Categories: , Tags: , , ,

$20.00

The Camaro 1969 Z/28 logo is one of the most requested logos we get at shows. And until recently, we were not able to get an approval to produce it. Well… Now we do.

The picture for this cutout is for general purposes only and no two pieces will look exactly the same. There may be heat marks from the cutting of a piece. Our mild steel is stored outdoors in the weather and it changes over time. So it’s always possible there could be mild surface rust. And if there are blemishes, marks or indentations, those are left in the steel too. That said, we cut this logo from mild steel that is a little thicker than 1/8 inch thick.

  • Bare metal
  • Size: 12.4″w x 7″h

Shop for More:  GM | Buick | Cadillac | Chevrolet | Corvette | GMC | Oldsmobile | Pontiac

General Motors TRADEMARK NOTICE:  General Motors Trademarks used under license to Speedcult.

Description

The Camaro 1969 Z/28 logo is one of the most requested logos we get at shows. And until recently, we were not able to get an approval to produce it. Well… Now we do.

The picture for this cutout is for general purposes only and no two pieces will look exactly the same. There may be heat marks from the cutting of a piece. Our mild steel is stored outdoors in the weather and it changes over time. So it’s always possible there could be mild surface rust. And if there are blemishes, marks or indentations, those are left in the steel too. That said, we cut this logo from mild steel that is a little thicker than 1/8 inch thick.

  • Bare metal
  • Size: 12.4″w x 7″h

Shop for More:  GM | Buick | Cadillac | Chevrolet | Corvette | GMC | Oldsmobile | Pontiac

General Motors TRADEMARK NOTICE:  General Motors Trademarks used under license to Speedcult.

Additional information

Weight 1.0 lbs
Dimensions 12.4 × 7 × .25 in